SealBoss – Injection pump

SealBoss provides pumps for a range of applications, namely crack injection, waterproofing, joint filling and epoxy.

PA3000 – Two component pneumatic epoxy injection pump.

The SealBoss PA 3000 epoxy injection pump is suitable for the two components epoxy and polyurethane resins and related products with viscosities between 10 and 1000 cps.

• Mix ratio 1:1 or 2:1
• Rugged construction
• Easy to use / clean
• Material flow rate approx. 0.4 GPM
• Dimension 14” x 22” x 29” high
• Weight 60lbs
• Tank capacities 3 1/3 gal. each
• Outlet pressure 15 – 800 psi

IP2C – Gel injection pump

The individual components are pumped separately and mixed in the mix head of the applicator while pumped through a plastic disposable element.  Check valve prevent the components from cross contamination.

• Mix ratio 1:1
• 3000 psi, 200 bar
• Material flow rate approx. 3.7 GPM
• Dimension 21.5” x 19.5” x 39” high
• Air requirement 6 – 12 CFM at 90 PSI, 200 – 400 l/min at 6 bar
• Max air intake 120 psi / 8 bar

P3003 – Two component epoxy / polyurethane injection pump.

This pump is designed for medium and small jobs and is suitable for contractors who inject epoxy and waterproofing products during commercial and residential work. With this pump it is a snap to get in and out of basements and confined areas as found on many job sites.

• Mix Ratio 1:1
• Max Pressure > 5000 psi
• Flow rate 30 ml to 1000 ml per min
• Weight 27lbs
• Electric drill, adaptors/fittings and packers sold separately
• Please ask your Geroquip representative for suitable injection products
• Viscosity range 10 -1000 cps